Project by Emma Taylor
What You Need:
0.5m Fabric 1 (Main Fabric)
0.5m Fabric 2 (Pocket)
0.5m Of Wadding
Scissors
Sewing Machine
Basic Sewing Kit
What You Need To Cut Out:
Cut 2 10”x16” pieces from fabric 1 (main fabric)
Cut 1 12”x16” pieces from fabric 2 (pocket)
Cut 1 10”x16” piece of wadding
Cut 2 12”x2” pieces from your left over fabric , this will make the ties
Construction
Step One:
Constructing the ties. Take your first 12”x2” piece and finger press in to the middle.
Then fold in half and stitch down the edge.
Step Two
Fold your 12”x16” piece in half and press. Then lay this piece on top of one of the main fabric pieces.
Insert your two ties on the top of the pocket then lay your second main piece on top of the whole sandwich right sides together
Step Three
Move this entire sandwich on top of the wadding and stitch all the way around leaving a 3”-4” gap for turning. I used ¼” seam allowance.
When stitched turn it right side out. Fold in the open seam and pin. Then sew all the way around the project closing the gap but also adding a nice stitch detail to the project.
Step Four
The last step on this project is making the pockets. Sew lines down the pocket part of the case. These can be what ever size you want depending on what you want to use your fabric roll for.
This is then your complete fabric roll pouch. Remember the measurements that I have used here are only a guide. You can 100% customize every aspect of this pouch.
If you make this pouch following this guide please tag me on your social media posts so I can see.
Thank you for reading my blog entry for the cotton craft company.
To see more from Emma, follow her on Instagram @taylormademisfit.
Made by Emma Taylor for The Craft Cotton Co 2022.
Comentarios