William Morris Table Settings

Project by Daisy Lawn

Here's a very simple table setting collection including a chair cover.

Skills...use of sewing machine only

You will need: Fabric of your choice, Threads, Wadding, Iron on Hem.

Coasters

Cut your fabric...1 piece for the top example 6” x 6” Cut your fabric...2 piece for the base 8” x 6” allow for seam allowances

Cut wadding the same size as your top Fold the base pieces in Half and Press.....now they are 4” x 6”

Tops and base

Lay the wadding down first Place the top face up Place the base piece on top, with folds to the inner

Sew all the way around

Trim all edges and snip corners

Turn Right Side out Via base split Insert a piece of Steam A Seam just inside the fold and press into place

This seals the back

Cutlery Holder Cut Fabric to your choice of size One Front Piece Two Back Pieces slightly larger as the coaster One Piece Folded and pressed to complete the pocket

Lay Wadding Top Face up Lay Pocket Lay Folded Base Pieces ...Folds to centre

Sew all the way around

Turn Right Side Out

Top stitch all around the edge and Stitch up the pocket if you want cutlery partitions

Pocket Chair Backs Very simple, measure your chair, cut front and backs, sew around the sides and top

Sew across the Corners to square them, add a hem, this completes a very simple Pocket Chair Back.

Sew across the Corners to square them, add a hem, this completes a very simple Pocket Chair Back.

Made by Daisy Lawn for The Craft Cotton Company 2021